| SOLD - Perkin Elmer Pyris 1 TGA and Spare Parts Kit, Part No. N5370030 |
|
SOLD - This Perkin Elmer Pyrus 1 TGA Thermogravimetric Analyzer (P/N: N537-0030) is the standard furnace model. It uses a high-sensitivity ultra-microbalance and an efficient gas switching system for quick, accurate results. Condition: Previously-owned, used, but in clean cosmetic condition. Spare parts kit is almost complete. The Pyris 1 TGA Spare Parts Kit (P/N: N537-0485) includes the following accessories: - Hang Down Wire Kit (N537-0487),
- Rubber Cement (0992-3480),
- Pinch Clamp #35 (0990-4905),
- Magnet Assy (N537-0466),
- Tare Weight (N537-0441, N537-0472),
- Stirrup Kit (0319-0265),
- Pan Kit (0319-0264),
- Calibration Standards Kit: Alum Sample Pan Kit, 0219-0041, Nickel, Perkalloy, HISAT-50, Iron,
- Five (5) sets of three (3) fuses: 0998-1611, 1.0A; 0998-1614, 2.0A; 0998-1617, 5.0A; 0998-1619, 0.375A; 0998-1753, 10.0A10.
- 1.3mm Hex Wrench (0992-3481),
- 0.050-in. Hex Wrench (0990-7236),
- Tube Clamp (0990-3011),
- Two (2) Furnace Inserts (N537-6556),
- Furnace Assy Teflon Washer (N537-6562),
- O-Rings: **0990-2031, ** 0990-2131, ** 0990-2163, ** 0990-2213, ** 0990-2223
|
 |
| Electrical Requirements: | 110-240V, 50/60Hz, 10A | | Temperature Range: | Subambient to 1000°C | | Temperature Precision: | ± 2°C | | Scanning Rates: | 0.1°C/min to 200°C/min | | Sample Mass: | Up to 1300mg | | Balance Tare: | Reproducible to ± 2µg | | Balance Sensitivity: | 0.1µg | | Balance Accuracy: | Better than 0.02% | | Balance Precision: | 0.001% | | Overall Dimensions: | 11W x 24D x 26H inches |
|
